ABDOMINAL HERNIA REPAIR
petak, 04.11.2011.
MARSHALL AMPLIFIER REPAIR. AMPLIFIER REPAIR
Marshall Amplifier Repair
Inside - Marshall Footswitch 6-pin DIN Connector Repair I found that the source of a lot of the footswitch intermittency and channel noise (crackling/hissing) was a result of the way the 6-pin DIN connector did not physically attach to the rear panel of the chassis. To remedy the problem, I drilled a very small hole through the chassis, inserted a small screw through the hole, and screwed into the connector, securely holding it against the chassis. Now things seem to be clean and quiet and my footswitch is no longer flickering on and off. Another word of advice is to make sure the footswitch cable does not hang from the connector, causing undue stress on the weak build quality. Simply pass the footswitch cable, from the front, through the handle on top of the head, and then down to the connector on the rear. Marshall TSL Footswitch DIY Repair Ah, the life of a Marshall TSL owner. The wires of this model footswitch are notoriously fragile, and DIY repairs like this are pretty common. I tinned each splice with solder so hopefully this time I've fixed it for good. It works 100% perfect for now. We'll see if it lasts. It was either this... or drop $130 on a new footswitch. I should have included something for scale. Those wires are each only about as thick as a paperclip. Related topics: porsche 911 repair manual laptop harddrive repair bicycle repair stands power supply repair service antique car radio repair television repair center pipe line repair |